Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== KerOS firmware v5.12.0 (November 2025) ======

===== Changes from v5.11.0 =====

==== Release corrections ====

  * Lighten some unnecessary logs which were in verbose mode
  * Prevent Basicstation and lorad from restarting each other in loop

==== Evolutions ====

  * Fix various security vulnerabilities
     * CVE-2024-32384
     * CVE-2024-39148
     * CVE-2024-32388
  * Remove LNS credentials from debug logs
  * Set temperature limit to 95°C on iBTS before cooldown
  * Lower MTU for cellular communications down to 1420
  * Extend network-monitoring to handle new unstabilities experienced on the field


==== Restrictions =====
  *** IPSec is not yet supported **
  * Some issues with the Wi-Fi interface (instabilities, no fallback...) on Wirnet iFemtoCell
  * When upgrading from KerOS firmware 4.x, all trustzone secrets are lost
  * When upgrading from KerOS FW 4.3.3, a hardware reset is necessary for FW 5.x burner to correctly detect USB
  * Update status for an update from KerOS FW 5.1.x, FW 5.2.x or FW 5.3.x is in error, but the update is working fine
  * No more support of GSM dongles (please contact Kerlink if you plan to use one)
  * When iZepto-E is powered by a computer, it cannot benefit from the connection of a gateway in router mode
  * The activation/deactivation of the GSM from the local web interface takes some time to execute, so previous activation status remains displayed for a while.     A page refresh after a delay of 15-20s after the action shows the right status



===== Firmware =====

==== Compatibility ====

  * Compatible with Wirnet™ i-series gateways (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation, Wirnet iFemtoCell-evolution, Wirnet iZeptoCell Ethernet, Wirnet iZeptoCell Cellular).


=== Software ===

  * Compatible with Wirnet™ i-series gateways secured with Kerlink Production fuses or without any fuses flashed.
  * Regular update (''keros.ipk'') is **incompatible** with firmware older than v5.x

<note important>
    * To upgrade the system from KerOS version 4.3.3 to KerOS version 5.x the use of a liveburner is MANDATORY. Two possibilities are available:
    * Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: [[wiki:keros_custo:upgrade_major_version|Major version upgrade with a custom liveburner]].
    * Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware)
</note>

==== Delivery ====

<note important>
The firmware is released in two formats: __KerOS__ and __Liveburner__.\\

__KerOS :__ Update the Firmware\\
To update the firmware **from v5.x**, the regular update procedure can be used.
See [[wiki:keros_custo:upgrade#upgrade_using_a_keros_package|system upgrade]] page.

\\
__Liveburner :__ Reset the Firmware of the product
  * Update stock version with FW 5.12.0.
  * Reset the default password on your gateway.
  * Erase the whole partition to reinstall the firmware.
</note>

===== Download =====

  * KerOS IPK 5.12.0:{{ :resources_multi_hardware::keros_5.12.0_klkgw-signed.ipk}} md5: ''0f890bd1dde1d43e8ea1b2e1961257ec''
  * Liveburner IPK 5.12.0: {{ :resources_multi_hardware::liveburner_5.12.0_klkgw-signed.ipk}} md5: ''ef534a01d5eb4ad44533d557ef98a00a''
  * Liveburner IPK 4.3.3-2: {{ :resources_multi_hardware::liveburner_4.3.3-2_klkgw-signed.ipk}} md5: ''12CFEFB8D4630A34AA90C77E6C73A193''
  * Custom liveburner IPK 5.12.0: {{ :resources_multi_hardware::custom-liveburner_5.12.0_klkgw-signed.ipk}} md5: ''d425f32b3d92f8fff4eb762a92c66a85''
  * Update liveburner package: {{ :resources_multi_hardware::update_liveburner_package-v5.12.0.tar.gz}} md5: ''46588b0de902679e048f171eafe02002''
  * 64-bit toolchain: {{ :resources_multi_hardware::poky-glibc-x86_64-keros-toolchain-klkgw-5.12.0.sh}} md5: ''dfeb4c04b2a3855241a8f17c2ecfe0df''
  * [[https://keros.docs.kerlink.com/en/releases/release-6-4#assets|Hotfix for KerOS6 installation through KerOS 5 WebUI]]
  * Lorad 2.5.2 package: {{ resources_multi_hardware:lorad-hotfix_2.5.2_klkgw.ipk }}; md5: 112e54f4740f2aa614d578c936783a00
Wirnet™ i-series

User Tools

Site Tools

Page Tools
